Mechanical pH Calcite 15 System Fleck 5600
|Online Auction Description|
10"x54" resin tank
Designed for 2-4 bathrooms and 3-5 people and/or homes with flows matching system capacities
Corrects low pH, causing the water to be close to neutral
Blended at no charge
For pH less than 6.0, blended with Corosex to provide the best results, at no additional charge
4.7 GPM Service Flow
Treats a maximum flow rate of 4.7 gallons per minute - See more info tab for details
6.3 GPM Backwash Flow
Requires a minimum of 6.3 GPM available for backwashing - See more info tab for details
Fleck 5600 Mechanical Control Head
Simple, low cost head provides automatic backwashing
Structural USA Resin Tank
Durable, high quality polyglass tank made by a trusted name it tank manufacturing
Dome Loading Port
Convenient dome loading port allows for easy replenishment of media without removing the control head
Naturally occuring calcium carbonate treats acid naturally
Corosex Media (Blended systems only)
Aggressive manganese oxide treats lower pH levels, providing maximum results for supplies with pH less than 6.0
Simple system connections and detailed installation instructions allow most homeowners to install this system themselves. For those who prefer to leave the work to a professional, most plumbers can install the system in 1-2 hours.
Acid neutralization is a must to prevent leaks, maintain fixtures, and ensure good health. Acidic water (water with a pH less than 7.0) can eat away at your plumbing and cause blue/green staining on your fixtures. Some also believe that water with a low pH can have adverse health effects
The pH system uses Calcite to neutralize the acid by dissolving and counteracting the acidity. In homes with pH less than 6.0, a blend of Calcite and Corosex is used, complimenting each other. The Corosex is more aggresive, providing the ability to raise very low pH levels, while the Calcite is slow acting, counterbalancing the Corosex and preventing excessive pH rise. Note: Due to the nature of pH systems some hardness is added to the water. Depending on exisiting hardness levels and pH level, an water softener after the pH system may be recommended
The high quality tank also boasts a dome loading port for easy media replenishment. Since the media dissovles to neutralzie the acid, regular replenishment is necessary, usually about once a year depending on water use, pH levels, and system size. With the dome loading port you avoid the need to disconnect and remove the control head, simply unscrew the port and add media!
Controlled by the Fleck 5600 control head, this system automatically backwashes. The backwash process simply forces water rapidly through the system in reverse direction, lifting the media and flushing accumulated particulates down the drain. It also prevents the media from solidifying and reducing efficiency. Made by Fleck, the #1 manufacturer of control heads in the US, the mechanical control head is one of the most popular heads on the market.
- Qty Needed:3 (2 on blended systems)
- Qty Needed:1 (blended systems ONLY)
- Qty Needed:20
Service flow rate is the rate (in gallons per minute) at which the media can effectively treat your water. The listed number is the manufacturers recommend rate for maximum neutralization. Higher flow rates MAY be possible in situations where slightly acidic water is desired/acceptable or where incoming water is not very acidic to begin with.
Backwash Flow Rates
The backwash flow rate is the minimum rate that MUST be available to ensure proper backwashing and peak system performance. While lower flows can be used and MAY provide adequate results, using less than the recommended flows WILL void the 30-day satisfaction guarantee. Warranties on the tank and control valve will remain unaffected.
|Item Attributes (provided by seller)|
|Payment Methods Accepted by Seller:|
|Shipping Terms||Seller pays for shipping expenses|
|Seller ships to United States address only.|
Please no International buyers.
|Ships From||67660, Kansas, United States|
|Postage||- Free Shipping -|
|Shipping & Payment Details||Immediate payment required. Most orders ships in 1-2 business days, with 3-5 days for delivery.|
|The seller , afwfilters , assumes all responsibility for the contents of this listing|
|Online Auctions from this seller|