The Board Set is assembled and painted, ready for you to play Cornhole with custom graphics applied. We use a slotted bolt and aviation nut to attach the legs, instead of a carriage bolt and wing-nut. If you have worked with carriage bolts, you know that they become loose when tightening and can strip out the wood. With our slotted bolts, you can attach and remove as many times as needed. When assembling our boards, we glue and screw everything together, so you have no exposed nail holes or screw holes on the playing surface. We use oil based paints to prime and topcoat your boards. We have found that when you stack latex painted boards, they tend to stick to each other. We have not found that with oil based paints.
The process for custom graphics may take some time depending upon what you have in mind. The boards shown above are the result of finding free graphics on the internet and combining them for the final product. This customer told me what he had in mind for a set of boards for a Christmas present to his friends, the Parkers. The graphics we need to use are hi-res and usually 2 mb in size. If we cannot find royalty free graphics, we may need to pay for the right graphic, which will result in additional charges. Island Paradise took a couple of weeks to produce, mainly in waiting to hear back from our customer. We were able to make a couple of tweaks to his satisfaction, so there was some back and forth communication.
Another method is for you to provide a hi-res jpg file that we can use for your graphic. Most internet images are only 72 pixels, so when you enlarge the file to 2' x 4', they are quite blurry and un-acceptable. The boat image I used was approximately 3200 x 2000 pixels, so I was able to enlarge and maintain the sharpness of the image. If you have an idea, we are sure to find a solution and a fun set of Cornhole Boards. Once you place the order, we will be in contact to determine your custom ideas.
CORNHOLE BOARD WRAPS
These boards include a set of two (2) cornhole board wraps. Our vinyl wraps have a protective layer applied and do not need additional sealing. Our graphics wraps are 23-5/8" x 48". We have these precut by our supplier so it reduces our application time. Wraps that are 24" x 48" will generally require some trimming. The cornhole boards that we make are generally painted white, so by using the precut wrap, it creates a white border.
STANDARD SERIES BOARDS
Our Standard Cornhole Boards are designed with quality construction and durability in mind. Our boards are hand crafted and include tight joints which are glued and screwed with concealed pocket screws, top quality 2 x 4's for strength and rock solid play, smoother cabinet grade 1/2" birch plywood playing surface, with routered top edges. Folding legs for transport mode and aviation nuts which allows how tight you adjust the leg swing. Aviation nuts do not vibrate loose, so you don't have to worry about lost hardware. We also use standard bolts instead of carriage bolts for ease of adjustment. The Standard Series boards are constructed to official specifications. If you are looking for cheap cornhole boards, this is not the place. We believe in building our boards the right way and not compromising for a few more sales. Buy your Cornhole game here, you'll be happy with the result.
- Regulation cornhole board dimensions
- Rock solid playing surface
- Hand crafted
- Made in the USA
- 24" x 48" birch plywood playing surface with routered plywood edges
- Full 6" hole with routered edges
- Installed graphics from our selection of graphics
- Boards come with 2 sets of 4 Cornhole Bags
- Your South Florida Gaming Source