Toolsorter Brand Tool Organizer Storage Board

Toolsorter Brand Garage Storage, Product Display Board / Store Fixture /Heavy-Duty Tool Organizer Pegboard with 30 Hooks, Mounting Bracket and Outline Pencil.

(TOOLS and OTHER EQUIPMENT SHOWN ARE NOT INCLUDED!)

The same kind that is used in over 6,000 NAPA Auto Parts Stores!

Now brought to you on WebStore by the manufacturer’s #1 distributor in the United States!

We have been providing quality products and customer service online since 1999!

Display boards just like these are used by 6,000 NAPA Auto Parts stores to display their products.

And now we provide limited, cost effective international shipping!

This 24 x 30-inch board comes ready to hang with:

+ 30 hooks

+ hanging bracket

+ Outline Pencil

Standard price of tool board with 30 hooks ........... $34.95
Standard price of optional hanger bracket ............ $ 8.98
Standard price of Outline Pencil.............................$ 2.75
Value ...................................................................$46.68

PLUS – a LIFETIME WARRANTY!

ADVANTAGES OVER OTHER DISPLAY BOARDS:

• Expandable for larger areas with additional boards (you can buy as many as you want right here upon checkout).
  
• Three types of hooks are provided which work most effectively with all types of tag top holes in merchandise. (And you can order more hooks if you need them!)
  
• Will not absorb liquids.
  
• Gasoline and oil resistant.
  
• Easy to clean.
  
• Stays looking clean and nice.
  
• Will not deteriorate like pegboard.
  
• Will not warp out of shape like pegboard.
  
• Will not tear out like pegboard.
  
• Hold heavier loads than pegboard.
  
• Can be easily removed from the hanging bracket to do your layout work on a table, laying flat.
  
• Can be used in damp or wet areas.
  
• Won't rust or corrode like steel panels.
  
• Can be used outside in extreme weather conditons.
  
• Hooks will NOT fall off, but yet can be easily removed and repositioned.
  
• Lighter than steel panels.
  
• The one time cost can be apportioned over a lifetime, making the cost to own them less than pennies per week! And they CAN last a lifetime because...
  
• ...You will want to take them with you when you move!
  

BE PROUD OF YOUR WORK AREA AND MORE EFFICIENT!

HAVE YOU THOUGHT ABOUT USING THEM:

READY TO HANG:

This versatile 24" x 30" tool organizer (1-1/8-inch thick) comes to you ready to hang, and allows you to hang almost any item for storage or display, including heavy tools, on hooks that won't fall out! Each board has a slightly raised border for extra strength and a completely finished look. Hooks are gently tapped in with a mallet or hammer, into tapered holes with chamfered edges for easy insertion. They can be removed and re-inserted an unlimited number of times. No spacers are needed. Slots for the hanger bracket are molded into the back. "Through-holes" for mounting screws are located in each corner, but if you are trying to match to wall studs, you can also drill through any of the holes to put the mounting screws wherever you want them. The board itself can be mounted either vertically or horizontally.

INCLUDES METAL HANGING BRACKET FOR MORE VERSATILITY:

It can also be hung with the hanging bracket which retrofits (without tools) to existing pegboard. The hanging bracket also allows you to hang a board where future access behind is required, (such as over electrical panels). The board simply lifts off the secured bracket. The bracket may also be desirable for ease in setting up the board by allowing you to lay it flat while arranging the tools and pin locations. To mount it, use suitable screws, toggle bolts, Molly bolts, screw-in EZ Anchors, or whatever works best for your particular type of wall or application.

EASY TO CUT TO FIT OVER DEVICES:

Also, if you need to mount it over a switch or receptacle, you can easily cut an opening by starting a hole with a 3/8-inch drill bit, and then do the cutting with a small saber saw.

CLOSER HOLE SPACING THAN ANY OTHER TOOL BOARD GIVES YOU MORE VERSATILITY:

Because your hooks can be spaced as close as 1/2" apart, you have much more versatility for tool hanging than common peg board. This allows you to fit more items, as well as odd-shaped items as compared to standard peg board. Our specialty pin (#3) and our heavy duty pin (#2) turned sideways allows for almost infinite spacing to hang items with odd widths. The retentive hooks also eliminate problems when trying to remove items hung up high (like a rake or a broom) where standard peg hooks usually fall out.

WATER PROOF – ABLE TO BE USED IN WET AREAS:

The board is totally water proof and weather proof. It can be mounted outside to hold items like lawn sprinklers, hoses, nozzles, and even pool supplies. Even salt water won't hurt it. It's great for tool storage in garden sheds!

TEMPERATURE PROOF:

Sub-zero temperatures or extremely hot weather have no effect on this board's performance.

MADE OF A HIGH RUBBER CONTENT, HIGH IMPACT STYRENE FOR DURABILITY AND PERFORMANCE:

The board itself is made of a high rubber content high impact styrene, and weighs approximately 8.3 pounds (12 pounds with hooks, bracket and tool outline pencil). It has a border frame around it and looks totally finished when hung (no raw edges), and can be hung tight against the wall.

NO SPACERS ARE NEEDED:

It may be mounted to a wall by screwing through the four "through holes" located in each corner, or by blind screwing through any of the 2800 (non-through) pin holes in it. All-purpose, or sheet rock screws work very well, although deck screws are even stronger.

OTHER ITEMS CAN BE MOUNTED TO THE BOARD:

You can also mount items like our Toolsorter brand storage bins (not included) or even shelving hardware, using #8 (1/2" long) sheet metal or self-tapping screws, which thread perfectly into any pin hole. Screws can be removed for future pin insertion. Also, the hooks can be used with shelving to display smaller articles.

STRENGTH:

These tool boards have been loaded with up to 162 pounds of tools and barbell weights! Of course, no single pin on ANY type of board should be expected to hold a huge barbell weight, but you can use several pins to outline the item and distribute the weight over several pins.

INCLUDED WITH YOUR KIT:

Your kit will include 30 pins (20-#1 pins, 5-#2 pins, and 5-#3 pins). The number one is a standard pin; #2 is for heavier applications; and #3 is a specialty pin which can be used either vertically or horizontally to hold many odd shaped items. It works great for those 1-inch wide keyholes punched in tag tops. Shown in the picture above are the #1, #2, and #3 style pins. Also included is the metal hanging bracket, which allows you to hang the board over such things as electrical panels. It also allows too you take the board down from the wall and do your tool layout on the work bench laying flat, making it much easier to handle.

It also comes with a white outline pencil to mark around your tools so you can see when a tool is missing. This can save you a lot of money!

CURRENT USERS OF OUR TOOL BOARDS INCLUDE:

• Raytheon
  
• Northrup Grumman
  
• U.S. Military (Langley Air Force Base, Naval Activities - Guam, Edwards Air Force Base)
  
• Armtec Defense Division (div. Esterline Technologies)
  
• U.S. National Institue of Standards and Technology
  
• Okinite Corp.
  
• Carleton Life Support Systems
  
• Bayer Corporation
  
• Signature Healthcare
  
• Jackson MSC
  
• Appleton

If tool boards just like these are used by 6,000 NAPA Auto Parts stores to display their products, plus all of these major companies above, don't you think they would provide a lifetime of service in your own use?

PROCESSING:

Your orders are always processed within 24 hours (48 hours on weekends or holidays), and on the shipping dock no later than the next day after that. After that, expect the usual 5-7 days shipping time with UPS (usually a little longer with international shipping). If you have any other questions, please feel free to contact us.

Shipping:

These tool boards weigh approximately 12 pounds each (including hooks, hanging bracket and tool outline pencil). Total carton weight per board is figured at 14 pounds. The carton size will be 31 inches long, 25 inches wide, and 3 inches thick. These products are shipped UPS only. Typical packaging is one to two boards to a carton. This has been determined to be the most cost effective way to ship them of all shipping methods or carriers, otherwise, size and weight factors in, and drives the cost up.

PAYMENT:

PayPal checkout using standard credit cards or echeck, immediately upon purchase.

RETURN POLICY:

If for any reason you are not satisfied with your purchase, please return it to us undamaged and intact for a full refund of your purchase price less shipping fees. Return shipping to be paid by buyer. Please contact us before returning any item to get instructions on how to return it.

FINAL NOTE:

We have been involved in business as both buyers and sellers for over forty years. We KNOW that customer service, quality products, and prompt shipping come before anything else. The customer is KING! Please contact us BEFORE leaving feedback that is other than positive, so we can address the issue! We leave feedback after receiving positive feedback from a buyer.