Adaptec 2410SA 4-Port SATA RAID Controller

The following Operating Systems are supported, Microsoft Windows® 2000, Windows XP®, Windows Server 2003, Linux, Red Hat 7.3 and 8.0, SuSE 8.0 and 8.1, UnixWare 7.1.1 and OpenUNIX 8. Note: For the latest Linux compatibility information, visit www..adaptec.com.

Storage Requirements:
Device drivers and storage management software require approximately 20 MB of disk space.

Motherboard Compatibility:
The controller can be installed in a universal PCI slot and requires a motherboard and BIOS that:
Complies with the PCI Local Bus Specification, Revision 2.2. Provides large memory-mapped address ranges.

Device Compatibility:
The Adaptec 2410SA controller supports up to four hard drives (Serial ATA only), using four Serial ATA cables supplied in this kit.

Controller Features:
The Adaptec 2410SA controller supports four Serial ATA drives. The controller offers the features and performance ideal for high-end workstations and entry-level servers.
Conforms with PCI Local Bus Specification, Revision 2.2
64-bit, 66-MHz PCI interface compatible with 32-bit/33-MHz PCI slots
64 MB of on-board RAM
Low-profile, MD2 form factor ideal for 1U/2U servers
Supports the Serial ATA Specification, version 1.0, with additional Serial ATA II support for enclosure management and enhanced I/O drivers for backplane support.
RAID levels 0, 1, 5, 10 and simple volume (JBOD)
Operating system independent configuration and RAID creation using the Adaptec RAID Configuration (ARC) utility
Flash ROM for easy upgrades of controller BIOS and ARC
Event logging and broadcasting, including messaging for alphanumeric pagers
Browser-Based Management Software—Adaptec Storage Manager
Browser Edition provides centralized management across all Adaptec host-based RAID products. This application allows system administrators to remotely manage, monitor, and configure RAID subsystems through password-protected Web access.